Problem with RTK6

[Freestyle]

Maybe you need a Third cable on the Controll Unit Like this.

Thats my own Controll Unit



Red and Black to + Brown to -

[cromwell]

Hi Freestyle!


I connected like you have yours control-unit connected with the third cable and it fixed the problem with the unit turning itself off.
So far so good! Thanks!

But "the zero" still flashes under the light-button, could it be indicating
that there is something wrong with lights?
When I push the buttons nothing seems to happend.

[Freestyle]

I Think you need a Third Cabel on the Light's too
It's like a Control Cabel for the Unit. (Rotation Control)

[cromwell]

I think you could be right there.. but where/how shall I connect the third cable with the lights?

[Commander]

You need original RTK6 rotators because there are magnetic rotation sensors.

[cromwell]

And there is no way to "connect away" these magnetic rotation sensors?

[cromwell]

Could some of these instructions be the solution for me?
I have only connected 2 cables, B3 to plus rotating light and A3 to minus on light. I think that more must be connected to work... correct me if I am wrong!






St.2 (Kennleuchte Nr.4 - Zusatzkennleuchte hinten Beifahrerseite)


A1 Ausrüstungserkennung Codierleitung 1
A2 Referenz GND Codierleitungen/Rotations-Kontrolle
A3 Minus für Lastkreis Kennleuchte
B1 Ausrüstungserkennung Codierleitung 2
B2 Kombileitung Synchronisation/Rotations-Kontrolle
B3 geschalteter Plus für Lastkreis Kennleuchte



bei KL-DC:


A1: braun-weiß
A2: braun-weiß + braun
A3: braun
B1: unbelegt
B2: weiß
B3: schwarz



bei KL-XR:


A1: unbelegt
A2: braun-weiß
A3: braun
B1: braun-weiß
B2: blau (Syn.)
B3: schwarz



bei sonstiger Kennleuchte als 3. oder 4. Zusatzkennleuchte (auch Fremdhersteller):


A1: Brücke zu A2
A2: Brücke zu A1 und B1
A3: RKL-Minus
B1: Brücke zu A2
B2: unbelegt
B3: RKL-Plus